Note: for further details, see the notations on each fitting or consult your Plasson representative.
Suitable Pipes - PE80, PE100 PEX (most fittings)*
PLASSON’S ELECTROFUSION FITTINGS:
Up to 75 mm (Inclusive) are Weldable to Pipes Up to SDR 11
90 mm & Up are Weldable to Pipes Up to
SDR 17
For tapping SDR 11 pipes (200 mm & up), please consult your Plasson representative
LIGHTFIT:
90 mm are Weldable to Pipes Up to SDR 26
110 mm & Up are Weldable to Pipes Up to SDR 33
WASTEWATER SADDLE:
200 mm & Up are Weldable to Pipes Up to SDR 26
WASTEWATER ADJUSTABLE ELBOW:
160 mm is Weldable to Pipes Up to SDR 17
* Please consult your Plasson representative
Material
All Plasson fittings are produced from material class PE100 which conform to international standards for potable water and natural or suitable manufactured gas systems.
From PE80, available upon request
Standards
Plasson ElectroFusion fittings are designed tested and quality controlled according to Plasson's internal standards. These standards are based on the following international standards and standard drafts:
GBE/PL2: PART 4
EN 1555
EN 12201
AFNOR NF T 54-066
AS/NZS 4129
AFNOR NF T 54-079
WIS 4-32-14
WIS 4-32-15
Quality
Plasson has incorporated a quality assurance system in accordance with ISO 9001. Operating approval according to ISO 9001 was granted to Plasson by the Israeli Standard Institute. Operating according to the ISO 9001 quality assurance system imposes stringent standards of control throughout the manufacturing processes.
Whereas the products shown in this catalogue illustrate and describe the current state of their development, Plasson reserves the right at all times to make such technical alterations as it shall see fit to its products. Although every care has been taken in the preparation of the information, specifications and other data included in this catalogue, we cannot rule out inadvertent errors or omissions. Purchasers should take into account possible deviations or variations which will not substantially diminish the functionality or performance of the products, and, in many cases, are designed to improve the same.
