Plasson provides a wide range of solutions for connecting PE pipe. Plasson's products can be found in municipal water distribution systems, gas conveyence systems, industrial fluids transfer and wastewater systems and mines in over 80 countries around the world.
|
|
PE Ball Valve |
Plasson PE Ball Valve
For Gas, Potable Water and Industrial PE Pipe Systems
-
 Full bore passage
-
Fully encapsulated and PE over molded for a completely welded, pure PE, single material system
-
Unique, fully injection molded one piece design, making it free from internal cavities and trapped dirt
-
1/4 turn operation with stops, open and closed position indicator
-
Flat placements at valve bottom
-
Seals NBR, material approved according to EN549 B1/H3
-
Very low pressure loss
-
Outlets PE100 SDR 11, for use with ElectroFusion or Butt Welding, can also be used with Compression Fittings
-
Long spigot outlets making double shot possible
-
Traceability barcode available
Pressure Rating
Gas PE100, SDR11
Water PN16 |
Standards
Plasson PE Ball Valves are designed, tested and quality-controlled according to Plasson's internal standards. These standards are based on the following International and European standards:
EN 1555, EN 12201, ISO DIS 10933, NFT 54-067
 Plasson Telescopic Activating Rod
Telescopic
Rod available in either Stainless Steel or Galvanized
Maximum Depth 2.1m
|
|
|
|
Print Page