• Full bore passage
• Fully encapsulated and PE over molded for a completely welded, pure PE, single material system
• Unique, fully injection molded one piece design, making it free from internal cavities and trapped dirt
• 1/4 turn operation with stops, open and closed position indicator
• Flat placements at valve bottom
• Seals NBR, material approved according to EN549 B1/H3
• Very low pressure loss
• Outlets PE100 SDR 11, for use with ElectroFusion or Butt Welding, can also be used with Compression Fittings
• Long spigot outlets making double shot possible
• Traceability barcode available

Standards
Plasson PE Ball Valves are designed, tested and quality-controlled according to Plasson's internal standards. These standards are based on the following International and European standards:
EN 1555, EN 12201, ISO DIS 10933, NFT 54-067

Plasson Telescopic Activating Rod
Telescopic
Rod available in either Stainless Steel or Galvanized
Maximum Depth 2.1m